Ultracare Intensifier S

Ultracare Intensifier S is an innovative, solvent-based formulation used to preserve and enhance the colour of natural stone (including stone with a polished surface), terracotta, terrazzo, marble-chip tiles, cementine tiles and engineered stone in both internal and external surroundings. When applied on the surface of the material, it refreshes and enhances its colour and gives it a very bright finish. Its particular solvent-based formulation helps it absorb into the material, especially those which are particularly compact or have a polished finish. UltraCare Intensifier S provides surfaces with a long-lasting and highly effective water and oil-resistant finish, protects them from staining and reduces their level of dirt pick-up. It is resistant to traffic, UV stable, does not form a film on the surface and has very little effect on the breathability or anti-slip properties of the material. Surfaces can be treated with just one single product. Recommendations • Always carry out a preliminary test on a sample area of the surface to verify its effect. • Only apply the product on surfaces resistant to solvents and always wear suitable protective clothing. • If the main requirement is to provide surfaces with a water and oil-repellent finish and to protect them against staining, it is recommended to use UltraCare Stain Protector W, Ultracare Stain Protector W Plus or UltraCare Stain Protector S (please contact us for further details). • Once UltraCare Intensifier S has been applied, it is not possible to return surfaces to their original condition. • Always carry out a preliminary test on a small, unexposed area of the surface, or on a sample of the material to be treated, to verify the effect it has on its finish before applying the product over the whole surface. • The treatment may be repeated after a certain period of time to maintain its effect, especially on external surfaces, and according to the type of material, its exposure to atmospheric agents an

Consistency

Homogeneous liquid

Colour

Transparent

Density

0.82 g/cm³

Dilution ratio

Ready to use

Surface drying

2-3 hours

• 01Ultracare Intensifier S is Suitable for application on internal and external floors and walls. Ideal for window ledges, floorsteps, decorative features and worktops.
• 02Natural stone (including stone with a polished surface), terracotta, terrazzo, marble-chip tiles, cementine tiles and engineered stone in both internal and external surroundings.